Latest Avaya 3100 Practice Tests Free Download with PDF & VCE (1-10)

QUESTION 1
Your customer has a communication Manager 6.0 branch location with SIP endpoints that need to survive a WAN failure when communication to the core or main Session Manager is unavailable.
Which solution will provide survivability to the remote location?

A.    an S8300 configured as an local survivable processor (LSP)
B.    a simplex server configured as an enterprise survivable server (ESS)
C.    an S8300 or simplex server configured as a Survivable Remote
D.    an S8300 01 simplex server configured for high availability (HA)

Answer: A

QUESTION 2
Consider the settings shown in exhibit displayed by using the display route -pattern command. You must deny calls from users in COR 10 to use route pattern 1. What should the fault restriction level (FRL) for COR 10 be?

image

A.    2
B.    3
C.    4
D.    5
E.    6

Answer: A

QUESTION 3
With reference to the list trace station 1101 printout shown in the exhibit, what statement describes what happened during the time period of the trace?

image

A.    Station 1101 called station, hung-up and finally called station 100.
B.    Station 1101 called station 1000, the unanswered call went to the voicemail, and finally station 1101
called 1001.
C.    Station 1101 called station 1000, and the station answered, then station 1000 transferred to call to
station 1001.
D.    Station 1101 called station 1000, unanswered; the call covered the station 1001.

Answer: C

QUESTION 4
You are configuring Personal Station Access (PSA) and you configure the Communication Manager with the following settings:
– Set TTI enabled = `Y’
– Set PSA Associated code = `25′ and disassociate code `#25′
– Set security code for the station = `1234′
You activate the station by keying in FAC for PSA, station extension number, `#’, the security code of the station, and `#’. However, the station is not activated.
Which statement describes the issue to be addressed?

A.    You need to set TTI = `n’
B.    You did not enable PSA on the COS of the station.
C.    You should not set the security code in sequential order.
D.    You did not key in the correct activation sequence

Answer: B

QUESTION 5
Which statement most accurately describes the major difference between Automatic Alternative Rom (AAR) and Automatic Route Selection (ARS) in a typical installation?

A.    AAR routes calls over a public network; ARS routes calls over a private network.
B.    AAR routes calls over a private network; ARS routes calls over a public network.
C.    AAR chooses routes automatically; ARS chooses routes according to pre programmed,
best- choice parameters.
D.    AAR chooses routes automatically; ARS chooses routes according to a manually administered
route plan.

Answer: B

QUESTION 6
The monitor and display capacity commands can be used to get a real-time status of the system using Avaya Site Administration (ASA).
Which command and tool should you use to view a summary of the overall condition of the system?

A.    monitor system command using terminal emulation
B.    monitor system command using GEDI
C.    monitor status command using terminal emulation
D.    display status using GEPI or terminal emulation

Answer: C

QUESTION 7
Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?

A.    Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `n’.
B.    Terminal Trans. Init.? Y, TTI state = `data’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `y’.
C.    Terminal Trans. Init.? Y, TTI state = `vdata’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `n’.
D.    Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `y’.

Answer: D

QUESTION 8
Which user’s does Call Park best serve?

A.    users who travel domestically using smartphones for basic communication
B.    users who need to pick up calls from any extension In the system when the call Is placed on hold
C.    users who travel internationally using smartphones for basic communication
D.    users who need to pick up calls from their smartphones while traveling

Answer: B

QUESTION 9
Which statement most accurately describes the function of automatic call back feature?

A.    It allows internal users who placed a call to a busy or unanswered external telephone to be called
back when the called telephone becomes available.
B.    It allows internal users who placed a call to a busy or unanswered internal telephone to be called
back when the called telephone becomes available.
C.    It allows internal users who are called when they are busy to activate a feature to automatically
call back that second caller, once the first call is finished.
D.    It allows internal users who are called when they are busy to place the second call on hold until
the first call is finished.

Answer: B

QUESTION 10
Which two Statements are true about Automatic Route Selection (ARS)? (Choose two)

A.    ARS routes calls only across tie trunks to local switching equipment.
B.    ARS routes calls to remote company locations in the absence of a private network.
C.    ARS allows Communication Manager to use an ISDN trunk to connect to the PSTN.
D.    ARS mutes calls across all trunk types but only to remote switching equipment

Answer: AC

…go to http://www.lead2pass.com/3100.html to download the full version Q&As.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back