With consideration to the exhibit, in which hardware component do you configure the IP address
150.122 44 210?
A. In the Media Gateway
B. In the Server administration port
C. In a CLAN board or Processor Ethernet port
D. In the Server services port
You are adding five new digital stations in a branch office where there is a G450 media Gateway.
On which media Module do you look for available ports?
Administrative users are assigned a user profile that specifies both a web profile group and a SAT profile group. This controls the functions a user can perform with SAT and within the system Management Interface (SMI).
How does the SAT profile control the functions?
A. It controls the SAT “action” commands the user can use.
B. It controls the time of day that the user can do Sat administration.
C. It controls which SAT screens or categories the user can access.
D. It controls the type of SAT access (GEDI or terminal emulation) the user can use.
Your customer had a short WAN outage and you want to know If all of the gateways have re- registered with the Communication Manager server.
Which Interface and command must be used?
A. ASA with a display process-status command
B. SMI with a process status command
C. SMI with a status summary command
D. ASA with a status media-gateway command
All release ox and later Avaya Aura?Communication Manager (CM) deployments support secure link access: SAL for remote access to the server and alarm notification from the server to the support engineer?
Which hardware or software is required at the customer site for SAL support of the CM server?
A. SAL software is required and uses a separate SAL server.
B. SAL software is required and uses a secure external modem.
C. SAL software is part of System Platform and requires no additional hardware.
D. SAL software is part of System Platform and uses a remote maintenance board (RMB) that must
be installed in the server.
Security Violation show valid and invalid attempts to access the system using three types of codes.
In addition to station security codes, which two types of codes are measured in security Violation reports? (Choose two)
A. barrier codes
B. access security gateway (ASG) codes
C. dial access codes (DAC)
D. authorization codes
E. administrative login codes
For which purpose is Automatic Alternate Routing (AAR) used?
A. Calls placed within a company over a public network
B. Calls placed within a company over a private network
C. Calls placed from outside a company over a private network
D. Calls placed from outside a company over a public network
Which command must be used to define the system internal number scheme of the extensions?
A. Change diaplan parameters
B. Change node-name IP
C. Change dialplan analysis
D. Change uniform-dialplan
The monitor and display capacity commands can be used to get a real-time status of the system using Avaya Site Administration (ASA).
Which command and tool should you use to view a summary of the overall condition of the system?
A. monitor system command using terminal emulation
B. monitor system command using GEDI
C. monitor status command using terminal emulation
D. display status using GEPI or terminal emulation
Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?
A. Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `n’.
B. Terminal Trans. Init.? Y, TTI state = `data’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `y’.
C. Terminal Trans. Init.? Y, TTI state = `vdata’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `n’.
D. Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′,
CTI enabled = `y’.
…go to http://www.lead2pass.com/3100.html to download the full version Q&As.
|One Time Purchase||✔||✖||✖||✖||✖|
|100% Pass Guarantee||✔||✖||✖||✖||✖|
|100% Money Back||✔||✖||✖||✖||✖|