[May 2018] 2018 New Lead2pass Cisco 400-351 Dumps Free Download 305q

2018 New Released Cisco 400-351 Exam Dumps Free Download In Lead2pass:

https://www.lead2pass.com/400-351.html

QUESTION 31
Your customer wants to configure LSCs and asks for specific information about which number to configure in the text box right next to the “Number of Attempts”. Which statement is true?

A.    The default number of attempts is 100.
B.    A value of 2 means that if an AP fails to join the Cisco WLC using an LSC, the AP attempts to Join the Cisco WLC using the default certificate
C.    A value of 255 means that if an AP fails to join the Cisco WLC using an LSC,the AP does not attempt to join the Cisco WLC using the default .
D.    A value of 3 means that if a user fails to authenticate,the user is disconnected after three retries. Continue reading

[May 2018] Lead2pass 2018 100% Valid 400-251 Dumps Guarantee 100% Pass 400-251 Certification Exam 359q

2018 Exam 400-251 Dumps From Lead2pass Cover All New 400-251 New Questions:

https://www.lead2pass.com/400-251.html

QUESTION 31
Refer to the exhibit. What is the effect of the given command sequence? Continue reading

[May 2018] 100% Pass Lead2pass 400-201 New Questions Free Version 647q

100% Valid Lead2pass Cisco 400-201 New Questions Free Version:

https://www.lead2pass.com/400-201.html

QUESTION 31
Cisco IOS XR software is partitioned into three planes: control, data, and management. Which three of these belong to the data plane? (Choose three.)

A.    XML
B.    RIB
C.    FIB
D.    QoS
E.    PFI Continue reading

[May 2018] Lead2pass Offering New 400-101 Exam PDF And 400-101 Exam VCE Dumps For Free Downloading 1197q

Official 400-101 Exam Preparation Download From Lead2pass:

https://www.lead2pass.com/400-101.html

QUESTION 41
Which three of the following security controls would you take into consideration when implementing loT capabities? (Choose three.)

A.    Layered Security Appoach.
B.    Place security above functionality.
C.    Define lifecycle controls for loT devices.
D.    Privacy impact Assessment.
E.    Change passwords every 90 days.
F.    Implement Intrusion Detection Systems on loT devices.

Answer: ADE

QUESTION 42
Which EIGRP feature allows the use of leak maps?

A.    offset-list
B.    neighbor
C.    address-family
D.    stub

Answer: D

QUESTION 43
Refer to the exhibit. Which IPv6 OSPF network type is applied to interface Fa0/0 of R2 by default?

431

A.    broadcast
B.    Ethernet
C.    multipoint
D.    point-to-point

Answer: A

QUESTION 44
Which option describes the characteristics of a public Infrastructure as a Serveice cloud service model?

A.    It is a way of delivering cloud-computing infrastructure (servers, storage, network, and operating systems) as an on-demand service.
B.    It is a cloud service where the underlying hardware is managed by the cloud service provider.
C.    It is a cloud-computing platform that facilitates the creation of web applications without the need to maintain the supporting software applications.
D.    It is a cloud-computing platform that facilitates the creation of web applications without the need to maintain the supporting software operating systems.

Answer: A

QUESTION 45
Which effect of configuring the passive-interface S0/0 command under the EIGRP routing process is true?

A.    It prevents EIGRP neighbor relationships from being formed over interface S0/0.
B.    It configures interface S0/0 to send hello packets with the passive-interface bit set.
C.    It configures interface S0/0 to suppress all outgoing routing updates.
D.    It configures interface S0/0 to reject all incoming routing updates.

Answer: A

QUESTION 46
What is the default IS-IS interface metric on a Cisco router?

A.    255
B.    64
C.    10
D.    128

Answer: C

QUESTION 47
Which two items must be defined to capture packet data with the Embedded Packet Capture feature? (Choose two.)

A.    the capture rate
B.    the capture point
C.    the capture buffer
D.    the buffer memory size
E.    the capture filter
F.    the capture file export location

Answer: BC

QUESTION 48
When you configure an IPv6 IPsec tunnel, which two fields can represent the ISAKMP identity of a peer? (Choose two)

A.    Authentication method
B.    DH group identifier
C.    Hostname
D.    IPv6 address
E.    Encryption algorithm

Answer: CD

QUESTION 49
Which action enables passive interfaces in RIPv6(RIPng)?

A.    Use “passive-interface default” under the routing process.
B.    Enable passive-interface on interface configuration.
C.    passive interface are not supported in RIPng.
D.    Enable passive-interface for each interface under the routing process.

Answer: C

QUESTION 50
Which statement is true about IGMP?

A.    Multicast sources send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
B.    Multicast receivers send IGMP messages to their first-hop router, which then forwards the IGMP messages to the RP.
C.    IGMP messages are encapsulated in PIM register messages and sent to the RP.
D.    Multicast receivers send IGMP messages to signal their interest to receive traffic for specific multicast groups.

Answer: D

400-101 dumps full version (PDF&VCE): https://www.lead2pass.com/400-101.html

Large amount of free 400-101 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDZ0lrZUFjNWtFYlk

[May 2018] 400-051 Exam Dump Free Updation Availabe In Lead2pass 534q

Lead2pass Provides Latest Exam 400-051 Dumps VCE For Free Downloading:

https://www.lead2pass.com/400-051.html

QUESTION 41
Which two statements are requirements regarding hunt group options for B-ACD implementation on Cisco Unified Communications Manager Express routers? (Choose two.)

A.    The ephone hunt group is mandatory.
B.    Either the ephone hunt group or the voice hunt group is acceptable.
C.    Hunt group members must be SCCP IP phones.
D.    Hunt group members can include both SCCP or SIP IP phones.
E.    Hunt group members must be SIP IP phones.
F.    The member hunting mechanism must be set to sequential. Continue reading

[May 2018] Lead2pass New Updated 352-001 Braindump Free Get 510q

Lead2pass Offers Free 352-001 Dumps Files for Free Downloading By 352-001 Exam Expert:

https://www.lead2pass.com/352-001.html

QUESTION 31
Refer to the exhibit. Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why? Continue reading

[May 2018] Lead2pass Offering New 312-50v9 Exam PDF And 312-50v9 Exam VCE Dumps For Free Downloading 614q

Official 312-50v9 Exam Preparation Download From Lead2pass:

https://www.lead2pass.com/312-50v9.html

QUESTION 41
Which type of antenna is used in wireless communication?

A.    Omnidirectional
B.    Parabolic
C.    Uni-directional
D.    Bi-directional

Continue reading

[May 2018] 100% Valid Lead2pass EC-Council 312-49v9 New Questions Free Version 490q

Lead2pass 2018 100% Valid 312-49v9 Dumps Guarantee 100% Pass 312-49v9 Certification Exam:

https://www.lead2pass.com/312-49v9.html

QUESTION 71
Data Acquisition is the process of imaging or otherwise obtaining information from a digital device and its peripheral equipment and media

A.    True
B.    False

Continue reading

[May 2018] Free Updated Lead2pass 300-365 Exam Dumps Download 71q

Free Version Lead2pass Cisco 300-365 PDF Dumps With Exam Questions Download:

https://www.lead2pass.com/300-365.html

QUESTION 31
Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?

A.    show ap config general Cisco_AP
B.    show wlan wlan_id
C.    show flexconnect summary
D.    show flexconnect group detail Continue reading

[May 2018] Free Downloading 300-360 Exam Dumps PDF From Lead2pass 147q

Free Lead2pass 300-360 PDF Download 100% Pass Exam 300-360:

https://www.lead2pass.com/300-360.html

QUESTION 31
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data. What does this indicate about the signal strength?

A.    The area is below the minimum threshold configured on the tool.
B.    The area is below the detectable level and indicates no RF signal.
C.    The area is below -100 dBm at coverage cell edge.
D.    The area is below -67 dBm at coverage cell edge.

Continue reading

Pages: 1 2 3 4 5 6 7 ... 364 365