Passed Microsoft 70-680 Exam with Pass4sure and Lead2pass PDF & VCE (201-211)

QUESTION 201
A user reports that he is unable to start his computer. He provides the following information:
– The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
– The user cannot locate his BitLocker recovery key.
You need to start Windows 7 on the computer. The solution must use the minimum amount of administrative effort. What should you do?

A.    From the BIOS, disable the Trusted Platform Module (TPM).
B.    Start the computer from the Windows 7 installation media and select Repair your computer.
C.    Start the computer from the Windows 7 installation media, press SHIFT + F10, and then run chkdsk.
D.    Start the computer from the Windows 7 installation media and select Install now.

Answer: D
Explanation:
No recovery key = no recovery. Time to install.
Any other option defeats the whole point of encrypting it. Encrypted volumes are locked when the encryption key is not available. When the operating system volume is locked, you can boot only to recovery mode. In recovery mode, you can enter the BitLocker password or you can attach the USB device that has the recovery key stored and restart the computer. Once you enter the recovery password or key, you can boot your computer normally.
The following events trigger recovery mode:
* The boot environment changes. This could include one of the boot files being modified.
* TPM is disabled or cleared.
* An attempt is made to boot without the TPM, PIN, or USB key being provided.
* You attach a BitLocker-encrypted operating system volume to another computer.

QUESTION 202
Your company network includes portables computers that have Windows 7 Ultimate and Windows 7 Professional installed. You want to standardize all portable computers to Windows 7 Professional for Key Management Server (KMS) licensing purpose.
You need to install Windows 7 Professional on all Windows 7 Ultimate portable computers What should you do?

A.    Launch Windows Update.
B.    Perform a clean installation over the existing system partition.
C.    Perform a clean installation on a non-system partition.
D.    Supply the Windows 7 Professional KMS Key.
E.    Launch Windows Anytime Upgrade.

Answer: B

QUESTION 203
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has a new deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK).
You need to capture an image of a Windows 7 reference computer.
Which two actions should you perform on the server before performing actions on the reference computer? (Each correct answer presents a complete solution. Choose two.)

A.    Run the Dism command with the /Mount-Wim option.
B.    Create a capture image in WDS.
C.    Run the BCDEdit command.
D.    Run the Dism command with the /Add-Driver option.
E.    Run the ImageX command with the /mount parameter.
F.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
G.    Add a boot image in WDS.
H.    Run the Start /w ocsetup command.
I.    Run the PEImg /prep command.
J.    Run the Diskpart command and the attach command option.
K.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
L.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
M.    Run the Dism command with the /Add-Package option.
N.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.

Answer: BG
Explanation:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
MDT relies on boot images created in WDS, WAIK is a collection of tools that you use to help automate deployment.
To capture an image created on a reference computer you need to add a boot.wim files to WDS, then using the boot.wim, create a capture wim file (usually called capture.wim). This allows you to capture a a reference computer.

QUESTION 204
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise.
Users complain that Windows displays too many notifications when they try to install software or make changes to their computer.
You need to decrease the number of notifications that Windows displays when users try to install software or make changes to their computer.
Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Local Users and Groups
B.    The Services Management console
C.    The Netsh command
D.    The Group Policy Management console
E.    Share Permissions
F.    The Folder Properties window
G.    Device Manager
H.    The Icacls command
I.    The User Account Control Settings Control Panel window

Answer: DI

QUESTION 205
Your corporate network contains a Remote Desktop Gateway (RD Gateway) server named Server1 and a Remote Desktop Session Host (RD Session Host) server named Server2. You have a computer named Computer1 that runs Windows 7. You use Computer1 from home. You need to access Server2 from Computer1. What should you do?

A.    Run Mstsc.exe /admin /v:server2:443.
B.    Run Mstsc.exe /console /v:server2:8080.
C.    Create a Remote Desktop Connection and modify the Connect from anywhere settings.
D.    Create a Remote Desktop Connection and modify the Server authentication settings.

Answer: C
Explanation:
To connect using an RD Gateway server, navigate to the Advanced tab of the Remote Desktop Connection Properties dialog box and click Settings under Connect From Anywhere. This opens the RD Gateway Server Settings dialog box. This dialog box allows you to specify RD Gateway settings, including whether or not you want the RD Gateway to be detected automatically, whether to use a specific RD Gateway server, as shown in the firgure, or you can specify Do Not Use an RD Gateway Server, which is the default setting.

image

QUESTION 206
A company has client computers that run Windows 7.
You set up a virtual private network (VPN) infrastructure that encapsulates Point-to-Point Protocol (PPP) traffic over the Secure Sockets Layer (SSL) channel of the HTTPS protocol. You need to create the VPN connection on the company’s client computers.
Which type of VPN should you use? (To answer, select the appropriate setting or settings in the work area.)

image
Answer:

image

QUESTION 207
You have a computer that runs Windows 7.
You need to connect to a network projector from the computer.
What should you do?

A.    Run Displayswitch.exe and select Projector only.
B.    Run Netproj.exe and provide the path to the projector.
C.    From Device Manager, click Add legacy hardware.
D.    From Network and Sharing Center, create an ad hoc network and run Displayswitch.exe.

Answer: B

QUESTION 208
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BranchCache feature installed.
The client computers have a third-party firewall application installed. You configure BranchCache on all computers to run in Distributed Cache mode.
You need to ensure that the client computers can access all cached files.
What should you do?

A.    Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702,
and inbound and outbound traffic for local TCP port 80.
B.    Check permissions.
C.    Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and
outbound traffic for local TCP port 8443.
D.    Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.
E.    Run the Netsh branchcache set service mode=HOSTEDSERVER clientauthentication=NONE command.
F.    Run the Netsh branchcache set service mode=HOSTEDCLIENT command.
G.    Run the Netsh branchcache set service mode=DISTRIBUTED command
H.    Create a Group policy object and configure the Set percentage of disk space used for client computer cache
option.
I.    Create a Group policy that sets Hash Publication for Branchcache as disabled.

Answer: A
Explanation:
Configuring Windows 7 as a BranchCache client involves enabling BranchCache, selecting either Hosted Cache mode or Distributed Cache mode, and then configuring the client firewall to allow BranchCache traffic.
You can configure BranchCache either using Group Policy or by using the Netsh command-line utility. The firewall rules that you configure depend on whether you are using Hosted Cache or Distributed Cache mode.
You can use predefined firewall rules or manually create them based on protocol and port.
The required firewall rules are as follows:
The BranchCache – Content Retrieval (Uses HTTP) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on TCP port 80. This rule is required for both Hosted Cache and Distributed Cache mode. You can create this rule using Windows Firewall With Advanced Security. The BranchCache – Peer-Discovery (Uses WSD) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on UDP port 3702. This rule is only required when using Distributed Cache mode. The BranchCache – Hosted Cache Client (HTTPS-Out) predefined rule. It this rule is not available, configure a rule that allows outbound traffic on TCP port 443. This rule is required only when using Hosted Cache mode.
You need to configure the firewall rules only when you configure BranchCache using Group Policy. When you configure BranchCache using Netsh, the appropriate firewall rules are set up automatically.

QUESTION 209
A computer that runs Windows XP has one basic disk containing a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space.
You need to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD).
What should you do first?

A.    Compress the hard drive.
B.    Extend the primary partition.
C.    Share the hard drive.
D.    Shrink the primary partition.

Answer: D

QUESTION 210
You administer a desktop computer that has the following hardware specifications:
– Dual-core 2.5 GHz processor
– 1 GB RAM
– 25 GB unpartitioned disk space
– Onboard graphics that has WDDM 1.0
You install a customized Windows 7 Enterprise 64-bit image on the computer by using unpartitioned disk space. The computer operates unacceptably slow.
You need to improve the performance of the computer.
What should you do?

A.    Install another 1 GB of RAM.
B.    Open Task Manager. Set the priority of all SYSTEM processes to High.
C.    Install a video card that has 128 MB of video RAM.
D.    Perform the initial Windows Experience Index run.

Answer: A
Explanation:
http://windows.microsoft.com/en-us/windows7/products/system-requirements
Should have 2GB RAM as a minimum.

If you want to pass Microsoft 70-680 successfully, donot missing to read latest lead2pass Microsoft 70-680 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-680.html

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back