Passed Microsoft 70-680 Exam with Pass4sure and Lead2pass PDF & VCE (231-240)

QUESTION 231
You have a computer that runs Windows 7.
The computer’s hard disks are configured as shown in the following table: You need to ensure that you can recover the operating system and all the files on the computer if hard disk experiences hardware failure.

image
What should you do?

A.    Create an Easy Transfer file on an external hard disk.
B.    Create an Easy Transfer file on a network location.
C.    Use the Backup and Restore tool to create a system image on an external hard disk.
D.    Use the Backup and Restore tool to back up data files for all users.

Answer: C
Explanation:
System Image in Windows 7
The new backup utilities in Windows 7 are actually pretty impressive and creating an image will be possible in all versions. Today we take a look at creating a backup image of your machine without the need for a third party utility like Ghost or True Image.
You are just finished installing a fresh copy of Windows 7 on your computer and have it set up to your liking. One of the first things you should do now is create an image of the disc so in the event of a crash you will be able to restore it to its current state. An image is an exact copy of everything on the drive and will restore it back to its current state. It’s probably best to create an image when everything is clean and organized on your system. This will make the image file smaller and allows you to restore the system with a smooth running set up.

QUESTION 232
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. AnAnswer choice may be correct for more than one QUESTION in the series.

A company has a deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK).
You are preparing to capture an image of a Windows 7 reference computer. You plan to deploy the image to new computers that have the same hardware as the reference computer.
You need to ensure that the captured image contains the device drivers from the reference computer.
What should you do?

A.    Run the Dism command with the /Add-Driver option.
B.    Run the Dism command with the /Mount-Wim option.
C.    Run the BCDEdit command.
D.    Run the Start /w ocsetup command.
E.    Run the ImageX command with the /mount parameter.
F.    Run the Diskpart command and the attach command option.
G.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
H.    Add a boot image in WDS.
I.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
J.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
K.    Create a capture image in WDS.
L.    Run the Dism command with the /Add-Package option.
M.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
N.    Run the PEImq /prep command.

Answer: G
Explanation:
Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the sysprep command with the /generalize option by specifying the PersistAllDeviceInstallssetting in the Microsoft-Windows- PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm).
http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx

QUESTION 233
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise.
A user has saved files in a C:\Users\ folder that coworkers must be able to read and edit. However, when coworkers try to edit those files, they get an "Access Denied" error.
You need to configure new NTFS permissions for the user’s C:\Users\ folder to ensure that the coworkers have access to write to that folder. Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Share Permissions
B.    The Folder Properties window
C.    The User Account Control Settings Control Panel window
D.    The Group Policy Management console
E.    The Services Management console
F.    Local Users and Groups
G.    The Netsh command
H.    Device Manager
I.    The Icacls command

Answer: BI

QUESTION 234
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise. The company also has a file server running Windows Server 2008 R2 that is configured to use BranchCache.
You need to configure the client computers to be BranchCache clients.
Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Device Manager
B.    Local Users and Groups
C.    The User Account Control Settings Control Panel window
D.    The Group Policy Management console
E.    The Services Management console
F.    The Folder Properties window
G.    The Netsh command
H.    The Icacls command
I.    Share Permissions

Answer: DG
Explanation:
To enable BranchCache on Windows 7 client computers using Group Policy, you must first create a Group Policy object (GPO) that will carry the BranchCache configuration. After creating the GPO, you configure the setting that enables BranchCache and choose whether BranchCache will operate in Distributed Cache mode or Hosted Cache mode.
To create a GPO, enable BranchCache, and select the cache mode Click Start, point to Administrative Tools, and click Group Policy Management Console.
Client configuration using netsh
When configuring client computers, you can enable BranchCache and choose between Distributed Cache mode and Hosted Cache mode with a single netsh command.

QUESTION 235
Your network consists of an Active Directory domain and 100 computers that run Windows 7.
The domain contains a logon script named logon.cmd.
You plan to deploy a new application named app1.msi by using the logon script. App1.msi is stored in \ \server1\share1. You need to modify the logon script to deploy the application.
What should you include in the logon script?

A.    Sbdinst.exe -u \\server1\share1\app1.msi -q
B.    Msinfo32.exe \\server1\share1\app1.msi
C.    Pkgmgr.exe /ip /m:\\server1\share1\app1.msi
D.    Msiexec.exe /i \\server1\share1\app1.msi /quiet

Answer: D
Explanation:
Msiexec
Provides the means to install, modify, and perform operations on Windows Installer from the command line.
To install or configure a product Syntax
msiexec /i {package|ProductCode}
/i : Installs or configures a product.
NOT Msinfo32
Displays a comprehensive view of your hardware, system components, and software environment.

QUESTION 236
You have a computer that runs Windows 7. Your company has a corporate intranet Web site. You open Windows Internet Explorer as shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can access Web pages on both the Internet and the Intranet. From the tools menu, what should you do?

image

A.    Click Work Offline.
B.    Click ActiveX Filtering.
C.    Point to SmartScreen Filter and then click Turn off SmartScreen Filter.
D.    Click Compatibility View.

Answer: A

QUESTION 237
You have a computer that runs Windows 7. You need to identify which unsigned drivers have been installed. Which command should you run?

A.    Cipher.exe /s
B.    Driverquery.exe /si
C.    Msinfo32.exe /q
D.    Pnputil.exe -i

Answer: B
Explanation:
Driverquery: Displays a list of all installed device drivers and their properties. /si: Displays digital signature information for both signed and unsigned device drivers.

QUESTION 238
A company has client computers that run Windows 7. You create an AppLocker policy for the client computers. You need to ensure that the AppLocker policy is enforced after the computer restarts. Which service should you modify? (To answer, select the appropriate setting or settings in the work area.)

image
Answer:

image

QUESTION 239
Your company has an Active Directory domain. All computers are members of the domain. Your network contains an internal Web site that uses Integrated Windows Authentication. From a computer that runs Windows 7, You attempt to connect to the Web site and are prompted for authentication. You verify that your user account has permission to access the Web site. You need to ensure that you are automatically authenticated when you connect to the Web site. What should you do?

A.    Create a complex password for your user account.
B.    Open Credential Manager and modify your credentials.
C.    Add the URL of the Web site to the Trusted sites zone.
D.    Add the URL of the Web site to the Local intranet zone.

Answer: D
Explanation:
Local Intranet Sites in the Local Intranet zone are computers on your organizational intranet. Internet Explorer can be configured to detect intranet sites automatically. It is also possible to add Web sites to this zone by clicking the Advanced button on the Local Intranet sites dialog box, as shown in the figure. The default security level of this zone is Medium-Low. Protected Mode is not enabled by default for sites in this zone.

image
Security settings are configured primarily by assigning sites to zones. Sites that require elevated privileges should be assigned to the Trusted Sites zone. Sites that are on the intranet are automatically assigned to the Local Intranet zone, though this may require manual configuration in some circumstances. All other sites are assigned to the Internet zone. The Restricted Sites zone is used only for Web sites that may present security risks but must be visited.

QUESTION 240
A device driver for a laser printer connected through the LPT port in a computer running Windows 7 does not function correctly. You uninstall the driver without issue and this process does not prompt a restart. The device does not appear in the Device Manager. Your need to ensure that Device Manager can detect the device, and then reinstall the device driver. Which Action open should you choose? (To answer, select the appropriate setting in the work area.)

image
Answer:

image

If you want to pass Microsoft 70-680 successfully, donot missing to read latest lead2pass Microsoft 70-680 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-680.html

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back