You have a workgroup that contains five computers. The computers run Windows 7. A computer named Computer1 has video and audio files. You need to share Computer1’s video and audio files on the network. Which two actions should you perform? (Each correct answer presents part of the
solution. Choose two.)
A. Create a HomeGroup.
B. Move the files to a Media Library.
C. Enable all BranchCache rules in Windows Firewall.
D. Connect a removable drive and enable BitLocker To Go.
HomeGroup ConnectionsThis option decides how authentication works for connections to HomeGroup resources. If all computers in the HomeGroup have the same user name and passwords configured, you can set this option to allow Windows to manage HomeGroup connections. If different user accounts and passwords are present, you should configure the option to use user accounts and passwords to connect to other computers. This option is available only in the Home/Work network profile.Media Library SharingBefore you turn on Media Library Sharing for a shared folder, you should know that Media Library Sharing bypasses any type of user-account access that you set for the shared folder. For example, let’s say that you turn on Media Library Sharing for the Photos shared folder, and you set the Photos shared folder to No Access for a user account named Bobby. Bobby can still stream any digital media from the Photos shared folder to any supported digital media player or DMR. If you have digital media that you do not want to stream in this manner, store the files in a folder that does not have Media Library Sharing turned on. If you turn on Media Library Sharing for a shared folder, any supported digital media player or DMR that can access your home network can also access your digital media in that shared folder. For example, if you have a wireless network and you have not secured it, anybody within range of your wireless network can potentially access your digital media in that folder. Before you turn on Media Library Sharing, make sure that you secure your wireless network. For more information, see the documentation for your wireless access point.
You have a computer that runs Windows 7. You need to identify which applications were installed during the last week. What should you do?
A. From Performance Monitor, run the System Performance Data Collector Set..
B. From Reliability Monitor, review the informational events.
C. From System Information, review the Software Environment.
D. From Performance Monitor, review the System Diagnostics Report.
Reliability Monitor tracks a computer’s stability. It can also tell you when events that could affect stability (such as the installation of a software application) occurred and whether any restarts were required after these events. Action Center monitors your computer and reports problems with security, maintenance, and related settings. The Windows Experience Index indicates the suitability of your current computer hardware for running resource intensive applications.
You have a computer that runs Windows 7. You open the Disk Management snap-in as shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can create a new partition on Disk 0. What should you do?
A. Shrink volume C.
B. Compress volume C.
C. Convert Disk 0 into a dynamic disk.
D. Create and initialize a Virtual Hard Disk (VHD).
Needs to have sufficient space in order to create a new partition. Hence shrinking the C:
partition will create additional space that can be used for a new partition.
Your network consists of one Active Directory domain.
You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of the domain. From Computer1, you can recover all Encrypting File System (EFS) encrypted files for users in the domain. You need to ensure that you can recover all EFS encrypted files from Computer2. What should you do?
A. On Computer1, back up %systemroot%\DigitalLocker. On Computer2, restore %systemroot% \DigitalLocker.
B. On Computer1, export the data recovery agent certificate. On Computer2, import the data recovery agent
C. On Computer1, run Secedit.exe and specify the /export parameter. On Computer2, run Secedit.exe and
specify the /import parameter.
D. On Computer1, run Cipher.exe and specify the /removeuser parameter. On Computer2, run Cipher.exe
and specify the /adduser parameter.
You can import the recovery agent to another computer running Windows 7 if you want to recover files encrypted on the first computer. You can also recover files on another computer running Windows 7 if you have exported the EFS keys from the original computer and imported them on the new computer. You can use the Certificates console to import and export EFS keys.
You can use both the Local Group Policy Editor and the Local Security Policy console to import and export security-related Group Policy settings. You can use this import and export functionality to apply the same security settings to stand-alone computers that are not part of a domain environment. Exported security files are written in Security Template .inf format. As well as using Local Group Policy Editor and the Local Security Policy console to import policies that are stored in .inf format, you can apply them using the Secedit.exe command-line utility.
NOT Cipher.exe /removeuser /adduser.
You have a computer that runs Windows 7. You need to configure the computer to meet the following requirements:
– Generate a new security ID (SID) when the computer starts.
– Ensure that the Welcome screen appears when the computer starts.
What should you do?
A. Run Sysprep.exe /oobe /generalize.
B. Run Sysprep.exe /audit /generalize.
C. Run Msconfig.exe and select Selective startup.
D. Run Msconfig.exe and select Diagnostic startup.
To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. Open an elevated command prompt on the reference computer and run the following command: c:\windows\system32\sysprep\sysprep.exe /oobe /generalize /shutdown Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged./generalize Prepares the Windows installation to be imaged. If you specify this option, all unique system information is removed from the Windows installation. The SID is reset, system restore points are cleared, and event logs are deleted. The next time the computer starts, the specialize configuration pass runs. A new SID is created, and the clock for Windows activation resets (unless the clock has already been reset three times)./oobeRestarts the computer in Windows Welcome mode. Windows Welcome enables users to customize their Windows 7 operating system, create user accounts, and name the computer. Any settings in the oobeSystem configuration pass in an answer file are processed immediately before Windows Welcome starts.
You have a computer that runs Windows 7. You need to confirm that all device drivers installed on the computer are digitally signed. What should you do?
A. At a command prompt, run Verify.
B. At a command prompt, run Sigverif.exe.
C. From Device Manager, click Scan for hardware changes.
D. From Device Manager, select the Devices by connection view.
Checking Digital Signatures with the File Signature Verification Tool The Dxdiag tool identifies problems with DirectX hardware and tells you whether that hardware has passed the WHQL testing regimen and has been signed digitally. However, it does not test the device drivers that are not associated with DirectX devices. To scan your computer and identify any unsigned drivers, you should use the File Signature Verification (Sigverif) tool.
You have a Virtual Hard Disk (VHD) and a computer that runs Windows 7.
The VHD has Windows 7 installed. You need to start the computer from the VHD. What should you do?
A. From Diskpart.exe, run Select vdisk.
B. From Disk Management, modify the active partition.
C. Run Bootcfg.exe and specify the /default parameter.
D. Run Bcdedit.exe and modify the Windows Boot Manager settings.
When you have created a VHD and installed a system image on it, you can use the BCDEdit tool Bcdedit.exe to add a boot entry for the VHD file in your computer running Windows 7.
You have a wireless access point that is configured to use Advanced Encryption Standard (AES) security. A pre- shared key is not configured on the wireless access point. You need to connect a computer that runs Windows 7 to the wireless access point. Which security setting should you select for the wireless connection?
WPA and WPA2 indicate compliance with the security protocol created by the Wi-Fi Alliance to secure wireless computer networks. WPA2 enhances WPA, which in turn addresses weaknesses in the previous system, WEP. WPA was intended as an intermediate measure to take the place of WEP while an IEEE 802.11i standard was prepared. 802.1X provides port-based authentication, which involves communications between a supplicant (a client computer), an authenticator (a wired Ethernet switch or WAP), and an authentication server (typically a Remote Authentication Dial In User Service, or RADIUS, server).
WPA-Enterprise and WPA2-Enterprise authenticate through the Extensible Authentication Protocol (EAP) and require computer security certificates rather than PSKs. The following EAP types are included in the certification program:
If you want to use AES and to use computer certificates rather than a PSK, you would choose WPA2- Enterprise.WPA2-PersonalIf you have a small network that is not in a domain and cannot access a CA server, but you install a modernWAP that supports AES, you would use WPA2-Personal (with a PSK).WPA-Personal If you have a small network that is not in a domain and cannot access a CA server and your WAP does not support AES, you would use WPA-Personal.802.1x If you have a RADIUS server on your network to act as an authentication server and you want the highest possible level of security, you would choose 802.1X.
You have two computers named Computer1 and Computer2 that run Windows 7. You need to ensure that you can remotely execute commands on Computer2 from Computer1. What should you do?
A. Run Winrm quickconfig on Computer1.
B. Run Winrm quickconfig on Computer2.
C. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer1.
D. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer2.
Windows Remote Management Service
The Windows Remote Management service allows you to execute commands on a remote computer, either from the command prompt using WinRS or from Windows PowerShell. Before you can use WinRS or Windows PowerShell for remote management tasks, it is necessary to configure the target computer using the WinRM command. To configure the target computer, you must run the command WinRM quickconfig from an elevated command prompt. Executing WinRM quickconfig does the following:
– Starts the WinRM service
– Configures the WinRM service startup type to delayed automatic start
– Configures the LocalAccountTokenFilterPolicy to grant administrative rights remotely to local users
– Configures the WinRM listener on http://* to accept WS-Man requests
– Configures the WinRM firewall exception
You have a computer that runs Windows 7. The computer connects to the corporate network by using a VPN connection. You need to ensure that you can access the Internet when the VPN connection is active. The solution must prevent Internet traffic from being routed through the VPN connection. What should you do?
A. Configure a static DNS server address.
B. Configure a static IP address and default gateway.
C. Configure the security settings of the VPN connection.
D. Configure the advanced TCP/IP settings of the VPN connection.
To prevent the default route from being created
In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box.
If you want to pass Microsoft 70-680 successfully, donot missing to read latest lead2pass Microsoft 70-680 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.
|One Time Purchase||✔||✖||✖||✖||✖|
|100% Pass Guarantee||✔||✖||✖||✖||✖|
|100% Money Back||✔||✖||✖||✖||✖|