Download Free Microsoft 70-663 PDF and VCE Updated Today 201-210

Vendor: Microsoft
Exam Code: 70-663
Exam Name: Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010
Version: 14.91

QUESTION 201
A corporate environment includes Exchange Server 2010 and an Active Directory Domain Services (AD DS) domain. Client computers run Windows 7 and Microsoft Outlook 2010.
You have the following requirements:

– Inspect all sent email messages.
– Automatically apply Information Rights Management (IRM) protection to all email messages marked as Company Confidential.

You need to recommend a solution that meets the requirements.
What should you recommend?

A.    Deploy Active Directory Rights Management Services (AD RMS) and then create a transport rule.
B.    Deploy Active Directory Rights Management Services (AD RMS) and then create an Outlook
protection rule.
C.    Deploy a digital certificate to each Exchange server and then implement Mutual Transport Layer
Security (MTLS).
D.    Deploy a digital certificate to each Outlook user and then use Secure/Multipurpose Internet Mail
Extensions (S/MIME).

Answer: A
Explanation:
Transport rules inspect messages for conditions specified in the rules. Messages that meet the conditions, and none of the exceptions, get the specified actions applied to them. Exchange 2010 provides you the ability to create rules that require Active Directory Rights Management Services (AD RMS) protection based on keywords or patterns

wps71E0.tmp

QUESTION 202
A corporate environment includes Exchange Server 2010 SP1. The Exchange Server environment includes one Hub Transport server, one Client Access server, and one Mailbox server.
You are designing an infrastructure for a secondary datacenter that will provide site resiliency for the primary datacenter that contains the existing Exchange Server environment.
You have the following requirements:

– Ensure that employees can access email if the primary datacenter fails.
– Ensure that each Mailbox database is active in only one datacenter at a time.
– Minimize the number of Exchange servers required.

You need to recommend a solution that meets the requirements.
Which two actions should you recommend? (Each correct answer presents part of the solution.
Choose two.)

A.    In the secondary datacenter, deploy one server with the Hub Transport, Client Access, and Mailbox roles.
Create a database availability group (DAG) that spans both datacenters.
B.    In the secondary datacenter, deploy one server with the Hub Transport and Client Access roles, and one
server with the Mailbox role. Create a database availability group (DAG) that spans both datacenters.
C.    Enable datacenter activation coordination (DAC) mode.
D.    Disable datacenter activation coordination (DAC) mode.

Answer: AC
Explanation:
One of the great changes in Exchange 2010 over Exchange 2007 is the ability to combine both CAS & Hub roles on mailbox servers configured as DAG

DAC mode is used to control the startup database mount behavior of a DAG. When DAC mode isn’t enabled, and a failure occurs that affects multiple servers in the DAG, when a majority of the DAG members are restored after the failure, the DAG will restart and attempt to mount databases. In a multi-datacenter configuration, this behavior could cause split brain syndrome, a condition that occurs when all networks fail, and DAG members can’t receive heartbeat signals from each other. Split brain syndrome can also occur when network connectivity is severed between the datacenters. Split brain syndrome is prevented by always requiring a majority of the DAG members (and in the case of DAGs with an even number of members, the DAG’s witness server) to be available and interacting for the DAG to be operational. When a majority of the members are communicating, the DAG is said to have quorum.

QUESTION 203
A corporate environment includes Exchange Server 2010. The Exchange Server environment includes one Mailbox server, one Client Access server, one Hub Transport server, and one Edge Transport server. The Mailbox server has a single database with multiple mailboxes.
You have the following requirements:

– Record all email messages sent to and from only specific users.
– Store copies of only the recorded messages in one designated mailbox.

You need to recommend a solution that meets the requirements.
What should you recommend?

A.    Create a journal rule.
B.    Configure journaling on the Mailbox server database.
C.    Create a transport rule on the Edge Transport server.
D.    Configure a litigation hold on the mailbox of each affected employee.

Answer: A
Explanation:
With PS:
New-JournalRule -Name "Discovery Journal Recipients" -Recipient [email protected] – JournalEmailAddress "Journal Mailbox" -Scope Global -Enabled $True

wpsB19D.tmp

wpsCB55.tmp

QUESTION 204
Drag and Drop Question
Your network contains two Active Directory forests. The forests contain domain controllers that run Windows Server 2008 R2. The forests are configured as shown in the following table.

wpsDFC1.tmp

An external trust exists from contoso.com to fabrikam.com.
You plan to deploy an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization will contain Mailbox servers in fabrikam.com.
You need to ensure that users in contoso.com can access the mailboxes in the Exchange organization.
What should you do? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

wpsF313.tmp

Answer:

wps32A.tmp

QUESTION 205
Drag and Drop Question
You plan to implement an Exchange Server 2010 Service Pack 1 (SP1) organization.
You are planning the compliance infrastructure for the organization.
You need to identify which permissions or management roles must be assigned to achieve your compliance requirements. The solution must minimize the number of rights assigned to users.
What should you identify? To answer, drag the appropriate permission or management role to the correct compliance requirement in the answer area.

wps1709.tmp

Answer:

wps2675.tmp

QUESTION 206
Drag and Drop Question
Your network contains an Active Directory forest. The forest contains two domains named
contoso.com and east.contoso.com. The functional level of the contoso.com domain is Windows Server 2003 interim. The functional level of the east.contoso.com domain is Windows Server 2003.
The contoso.com domain contains a domain controller named DC1. DC1 runs Windows Server 2003 Service Pack 2 (SP2). DC1 is configured as a global catalog server. The east.contoso.com domain contains a domain controller named DC2. DC2 runs Windows Server 2003 RTM.
You need to recommend changes to the Active Directory forest to ensure that servers that run Exchange Server 2010 Service Pack 1 (SP1) can be deployed to both domains.
You plan to raise the functional level of the forest to Windows Server 2003.
Which other actions should you plan to perform? To answer, drag the appropriate actions to the correct location or locations in the answer area.

wps3AA1.tmp

Answer:

wps655A.tmp

QUESTION 207
Your network contains an Active Directory forest named contoso.com and two Active Directory sites named Site1 and Site2.
You plan to deploy an Exchange Server 2010 Service Pack 1 (SP1) organization.
An independent consultant recommends a design for the Exchange Server 2010 SP1 deployment as shown in the following table.

wps7967.tmp

You are evaluating the implementation of the Hub Transport server role on EX4.
You need to identify which Exchange server configuration will minimize the loss of email messages sent between users of the organization if a Hub Transport server fails.
What should you identify?

A.    DNS round robin on DC1 and DC2
B.    Datacenter Activation Coordination (DAC) mode
C.    shadow redundancy
D.    delayed acknowledgments (ACKs)
E.    a Hosts file on EX1, EX2, EX3, and EX4
F.    a database availability group (DAG)
G.    a single copy cluster (SCC)
H.    an activation preference for a database
I.    EdgeSync synchronization
J.    a DNS server on DC2
K.    Edge Transport server cloned configuration
L.    local continuous replication (LCR) on EX1, EX2, EX3, and EX4

Answer: C
Explanation:
High availability strategies for Exchange have focused on the availability and recoverability of data stored in mailbox databases. When you implement a highly available solution for your Mailbox servers, the e-mail messages won’t be lost, and they can easily be recovered after a failure, after they arrive in a mailbox.
However, these strategies didn’t extend to messages while they’re in transit. If a Hub Transport server fails while processing messages and can’t be recovered, data loss could occur. As the volume of messages processed by Hub Transport servers increases, potential data loss becomes an increasing concern for administrators.
Microsoft Exchange Server 2007 introduced the transport dumpster feature for the Hub Transport server role.
An Exchange 2007 Hub Transport server maintains a queue of messages delivered recently to recipients whose mailboxes are on a clustered mailbox server. When a failover is experienced, the clustered mailbox server automatically requests every Hub Transport server in the Active Directory site to resubmit mail from the transport dumpster queue. This prevents mail from being lost during the time taken for the cluster to fail over.
While this does provide a basic level of transport redundancy, it’s only available for message delivery in a cluster continuous replication (CCR) environment and doesn’t address potential message loss when messages are in transit between Hub Transport and Edge Transport servers.
Exchange Server 2010 introduces the shadow redundancy feature to provide redundancy for messages for the entire time they’re in transit. The solution involves a technique similar to the transport dumpster. With shadow redundancy, the deletion of a message from the transport databases is delayed until the transport server verifies that all of the next hops for that message have completed delivery. If any of the next hops fail before reporting back successful delivery, the message is resubmitted for delivery to that next hop.
Shadow redundancy provides the following benefits:
It eliminates the reliance on the state of any specific Hub Transport or Edge Transport server. As long as redundant message paths exist in your routing topology, any transport server becomes disposable. If a transport server fails, you can remove it from production without emptying its queues or losing messages.
If you want to upgrade a Hub Transport or Edge Transport server, you can bring that server offline at any time without the risk of losing messages. It eliminates the need for storage hardware redundancy for transport servers. It consumes less bandwidth than creating duplicate copies of messages on multiple servers. The only additional network traffic generated with shadow redundancy is the exchange of discard status between transport servers. Discard status is the information each transport server maintains. It indicates when a message is ready to be discarded from the transport database. It provides resilience and simplifies recovery from a transport server failure.

QUESTION 208
You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The network contains two Active Directory sites named Site1 and Site2. Site1 contains an Edge Transport server named Server1. Each site has a direct connection to the Internet.
Server1 receives all of the email sent to the Exchange organization from the Internet.
You need to recommend a solution that meets the following requirements:

– Prevents an email message from being returned to the sender if Server1 fails.
– Prevents an email message from being returned to the sender if the connection to the Internet in
Site1 fails.

What should you include in the recommendation? (Each correct answer presents a complete solution. Choose all that apply.)

A.    Deploy a new Edge Transport server named Server2 to Site2. Create a Network Load Balancing
cluster that contains Server1 and Server2. Create a mail exchange (MX) record for the cluster.
B.    Deploy a new Edge Transport server named Server2 to Site2. Create a failover cluster that contains
Server1 and Server2. Create a mail exchange (MX) record for the cluster.
C.    Create a mail exchange (MX) record that points to an Exchange Hosted Service.
Configure the Exchange Hosted Service to accept email messages for your SMTP domain.
D.    Deploy a new Edge Transport server named Server2 to Site2. Create a mail exchange (MX) record
for Server2.

Answer: CD
Explanation:
This question had both c and d as the answers however I disagree with that. From what I can see there is no Exchange Host Service . The only way to meet the requirements of the question you will need to deploy a second edge server in site 2 and create the MX record. As both sites have a direct link to the Internet each Edge Server will load balance across the 2 servers

wps9E37.tmp

QUESTION 209
Drag and Drop Question
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
You need to recommend tools that can be used to monitor the Exchange organization.
Which tool or cmdlet should you use to perform each task? To answer, drag the appropriate tool or cmdlet to the correct task in the answer area.

wpsB437.tmp

Answer:

wpsC681.tmp

 

QUESTION 210
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. The network contains an Exchange Server 2010 Service Pack 1 (SP1) organization.
Corporate security policy states that all user connections from the Internet to the Exchange organization must be encrypted.
You plan to deploy the following client connection methods for the Exchange organization:

– POP3
– IMAP4
– Outlook Web App
– Outlook Anywhere

You need to identify which firewall ports must be opened to meet the security policy. The solution must use the default TCP ports of each connection method.
Which TCP ports should you identify? To answer, drag the appropriate TCP port to the correct connection method in the answer area.

wpsDCEE.tmp

Answer:

wpsF031.tmp

If you want to pass Microsoft 70-663 exam successfully, donot missing to read latest lead2pass Microsoft 70-663 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-663.html